IOT USA
M410T Ethernet Remote Digital Input Module
Couldn't load pickup availability
M410T Ethernet Remote I/O Module
The M410T is a 16CH Digital Input Module (RS485/Ethernet) and provides 16 optical-isolated digital inputs, supports max. 10MHz high speed pulse counter.
Introduction
The M140T is a 16CH Digital Input Module. This Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module. It features an embedded 32-Bit High Performance Microprocessor MCU and an Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be integrated into a SCADA, OPC server, and other automation systems. It is designed for working in harsh industrial environments and is widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
The 16CH Digital Input Module M410 Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet industrial timing requirements.
The 16CH Digital Input Module M410 Ethernet Remote I/O module provides 16 optical-isolated digital inputs and can support max. 700KHz high speed pulse counter. All the I/O’s with high sampling frequency and special filtering strategy to ensure their reliability.
Features
1. Embedded 32-Bit High Performance Microprocessor MCU, built-in watchdog.
2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection.
3. Management and configuration via LAN connection configuration software for effortless operation and maintenance.
5. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol.
6. 16 optical isolated digital input, supports max. 700Khz high speed pulse counter.
7. High sampling frequency and special filtering strategy to ensure reliability.
8. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules.
9. Supports register mapping function and extends I/O inquiry strategy.
10.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost.
11.LED instructions work status, with reset button to reset, easy on-site installation and commissioning.
12.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field.
13.Small size, L105mm (about 4.13 in) * W88mm (about 3.46 in) * H30mm (about 1.18 in), compatible wall installation and DIN35mm (about 1.38 in) industrial rail installation.
Specifications
Digital Input
Sensor Type | Wet Contact (NPN or PNP), Dry Contact |
I/O Mode |
DI or Event Counter |
Dry Contact |
|
Wet Contact (DI to COM) |
|
Counter Frequency | Max. 700kHz(Only the 1st Channel can be used as high speed pulse counter) |
Digital Sampling Frequency | 500Hz |
Digital Filtering Strategy | Continues 3 Times |
Isolation |
Optical Isolated, 3k VDC or 2k Vrms |
Working Power Requirements
Input Voltage |
24 to 36 VDC, Peak Voltage; +40VDC Power Consumption: Less Than 3W |
Input Current | 139mA @24VDC |
Power Output
Output Voltage |
12 to 36 VDC |
Output Current | 139mA @ 24 VDC |
LAN
Ethernet | 10/100Mbps RJ45 ports |
Protection | 15KV ESD Protection |
Protocols | Modbus TCP, TCP/IP, MQTT, TCP Server, TCP Client |
Max TCP Connection | 5 |
Serial Port
RS485 | MODBUS- RTU Protocol, Modbus-ASCII Protocol |
Protection | 15KV ESD Protection |
Modbus Slave Address | 1-255 |
Baud Rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 128000Bps |
Mapping Registers | Bit Type: 300 Registers, 16-Bit Type: 300 Registers |
Physical Characteristics
Wiring | I/O Cable Max. 14AWG |
Dimensions | 105mm x 88mm x 30mm |
Weight | Under 205grams |
Mounting | DIN Rail or Wall |
Environmental Limits
Operating Temperature |
Standard Model: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Altitude | Up to 3000m |
Downloads
M410T - Data Sheet Download
M410T User Manual
Applications
Typical applications:
1. BTS Monitoring.
2. Security Alarm System applications.
3. Supervision and monitoring alarm systems.
4. Automatic monitoring system.
5. Vending Machines security protection.
6. Pumping Stations, Tanks, Oil or Water levels.
7. Buildings and Real Estate.
8. Weather Stations.
9. River Monitoring and Flood Control.
10. Oil and gas pipelines.
11. Corrosion protection.
12. Temperatures, water leakage applications.
13. Wellheads, boat, vehicle.
14. Energy saving, street lights control system.
15. Valve controls.
16. Transformer stations.
17. Unmanned machine rooms.
18. Control room application.
19. Automation System, M2M.
20. Access Control System.
21. PLC Gateway, PLC Remote Monitoring.
![M410T Ethernet Remote Digital Input Module - IOT USA](http://www.iotusa.com/cdn/shop/products/M410-01.jpg?v=1657218310&width=1445)
![M410T Ethernet Remote Digital Input Module - IOT USA](http://www.iotusa.com/cdn/shop/products/M410-02.jpg?v=1657218310&width=1445)
![M410T Ethernet Remote Digital Input Module - IOT USA](http://www.iotusa.com/cdn/shop/products/M410-03.jpg?v=1657218310&width=1445)
![M410T Ethernet Remote Digital Input Module - IOT USA](http://www.iotusa.com/cdn/shop/products/M410-04.jpg?v=1657218310&width=1445)
![M410T Ethernet Remote Digital Input Module - IOT USA](http://www.iotusa.com/cdn/shop/products/M410-05.jpg?v=1657218310&width=1445)
![M410T Ethernet Remote Digital Input Module - IOT USA](http://www.iotusa.com/cdn/shop/products/M410Datasheet-01.jpg?v=1657218310&width=1445)